Recyclying polyethylene terephthalate (PET) and its applications
Article Sidebar
Full Text: 
PDF
Abstract
PET is one of the common types of materials which are widely used in many fields with a significant growth rate. With a wide range of uses, PET almost replaces the traditional materials such as wood, ceramic, and glass. However, due to the increasing assumption of PET and its short life cycle, the amount of PET waste thrown into the environment is very large every year. Therefore, recycling or re-use of PET waste is essential to prevent environmental pollution and reduce the natural resources exploration. Study on PET recycling methods and applications of recycled PET is a matter of concern today.
Tóm tắt
Article Details
References
Friston, Karl J, et al., 1991, “Plastic transformation of PET images”. Journal of Computer Assisted Tomography.
N.S. Murthy, et al., 1991, “ Structure of the amorphous phase in crystallizable polymer: Poly(ethylene terephthalate)”.
Trung tâm tài nguyên và môi trường, trường Đại học Tổng hợp Hà Nội (dịch và giới thiệu) (1993), Cứu lấy Trái đất – chiến lược cho cuộc sống bền vững, NXB Khoa học Kỹ thuật.
Scheirs J (1998) Recycling of PET. In: Polymer recycling: science, technology and applications. Wiley Series in PolymerScience, Wiley, Chichester, UK.
K.S Rebeiz., 1995, “Time temperature properties of polymer concrete using recycled PET”. Department of Civl and environmental engineering, Lafavette college, Easton, PA 18042, USA.
K.S Rebeiz., 1996, “Precast use of polymer concrete using unsaturated polyesterresin based on recycled PET waste”. Science: 215-220.
Brandrup, J., E. H. Immergut, E. A. Grulke, A. Abe, et al., 1999. Polymer handbook. Wiley New York.
Don Kaufman, G eoff Wright et al., 1999, “Compounds from old plastic: Recycling PET plastic via depolymerization. An Activity for the Undergraduate Organic Lab”. Department of Chemistry, University of Nebraska at Kearney, Kearney, NE 68849.
J.J.Robin et al., 1999, “Study of thermal and mechanical properties of virgin and recycled poly(ethylene terephthalate) before and after injection molding”.
Andrzej Galeski et al., 2000, “Characterization of scrap poly(ethylene terephthalate)”.
L Incarnato et al., 2000, “Structure and rheology of recycled PET modified by reactive extrusion”.
Chikara kawamura et al., 2001, “Coating r es ins synthesized from recycled PET”. Sciencedirect: 185-191.
Nguyễn Đình Triệu, 2001. Các phương pháp phân tích vật lý và hóa lý. Nhà xuất bản Khoa học và Kỹ thuật. Hà Nội.
D.A. Silva et al., 2004, “Degradation of recycled PET fibers in Portland cement-based materials”. Sciencedirect: 1741-1746.
Ali, M. F. and M. N. Siddiqui, 2005. “Thermal and catalytic decomposition behavior of PVC mixed plastic waste with petroleum residue”. Journal of Analytical and Applied Pyrolysis: 282-289.
Awaja, F. and D. Pavel., 2005. “Recycling of PET. European Polymer Journal”: 1453-1477.
A.L.F. de Moura Giraldi, R. Cardoso de Jesus, 2005,“The influence of extrusion variables on the interfacial adhesion and mechanical properties of recycled PET composites”.
Firas Awaja et al., 2005, “Recycling of PET”.
Trần Vĩnh Diệu và Trần Lê Trung, 2006, “Môi trường trong gia công chất dẻo và compozit”. Nhà xuất bản Bách khoa – Hà Nội.
Hoàng Anh, 2006, “Luận văn Nghiên cứu và đề xuất các công nghệ tái chế khả thi chất thải rắn plastic trên địa bàn TP.HCM”.
Das, J., A. Halgeri, V. Sahu and P. Parikh, 2007, “Alkaline hydrolysis of poly (ethylene terephthalate) in presence of a phase transfer catalyst”. Indian journal of chemical technology: 173-177.
Fugen DAVER et al., 2007, “Rheological characterisation of recycled poly (ethylene terephthalate) modified by reactive extrusion”.
Das, J., A. Halgeri, V. Sahu and P. Parikh, 2007. “Alkaline hydrolysis of poly (ethylene terephthalate) in presence of a phase transfer catalyst”. Indian journal of chemical technology: 173-177.
Đỗ Quang Minh, 2007. “Tổng hợp coban aluminat (CoAl2O4) kích thước hạt siêu mịn ở nhiệt độ thấp”. Science & Technology Development, Vol 10, No.10-2007.
Võ Thị Hai, Hoàng Ngọc Cường, “ Phản ứng cắt mạch poly(ethylen terephthalat) (PET) từ vỏ chai bằng dietylen glycol (DEG)”, Science & Technology Development, Vol 11, No.06 – 2008.
Siddique, R., J. Khatib and I. Kaur, 2008, “Use of recycled plastic in concrete: a review”. Waste management: 1835-1852.
Phan Vũ Hoàng Giang, 2008, “Công nghệ tái sử dụng chai pet”.
Peter Schmid et al., 2008, “ Does the reuse of PET bottles during solarwater disinfection posea healthriskdue to the migration of plastic isers and other chemicals into the water?”. Science: 5054-5060
Caparanga, A. R., B. A. Basilia, K. B. Dagbay and J. W. Salvacion, 2009, “Factors affecting degradation of polyethylene terephthalate (PET) during pre-flotation conditioning”. Waste management: 2425-2428.
Bulent Yesilata et al., 2009, “Thermal insulation enhancement inconcretes by adding waste PET and rubber pieces”. Construction and Building Materials: 1878-1882.
Panda, A. K., R. Singh and D. Mishra, 2010. “Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective”. Renewable and Sustainable Energy Reviews: 233-248.
Kinda Hannawi et al., 2010, “Kinphysical and mechanical properties of mortars containing PET and PC waste aggregates”. Science: 2312-2320.
Waqas Nawaz et al., 2010, “PET recycling chemical and mechanical methods”.
Upasani, P. S., A. K. Jain, N. Save, U. S. Agarwal, et al., 2012, “Chemical recycling of PET flakes into yarn. Journal of Applied Polymer”. Science: 520-525.
Seville and Spain, 2012, “End of waste criteria for waste plastic for conversion technical proposals”.
Hoàng Thị Đông Quỳ, Phạm Huỳnh Trâm Anh, Thiêm Trí Viễn, Nguyễn Ngọc Như Hương, et al., 2012. Phụ gia chống cháy phi halogen ứng dụng vào các loại vật liệu polyme chống cháy trên cơ sở polyeste không no. Tạp chí Phát triển KH&CN.
Saisinchai et al., 2013, “Separation of PVC from PET/PVC Mixtures Using Flotation by Calcium Lignosulfonate Depressant”. Engineering Journal: 45-54.
Nurul Munirah Abdullah and Ishak Ahmad, Potential of Using Polyester Reinforced Coconut Fiber Composites Derived from Recycling Polyethylene Terephthalate (PET) Waste, Fibers and Polymers 2013, Vol.14, No.4, 584-590.
Dutta and Soni, 2013, “A Review on Synthesis of Value Added Products from Polyethylene Terephthalate (PET) Waste”. Polymer Science, Ser. B.
Supawee Makkam, , 2014, “Rheological and Mechanical Properties of Recycled PET Modified by Reactive Extrusion”.
Mª Victoria Gonz_alez Rodríguez et al, 2014 “Assessing changes on poly(ethylene terephthalate) properties after recycling: Mechanical recycling in laboratory versus postconsumer recycled material”.
Võ Thị Bạch Phương, 2014. Khảo sát quá trình phân hủy Polyetylen tỷ trọng cao (HDPE) bằng xúc tác thải FCC Dung Quốc Luận văn tốt nghiệp cao học. Trường Đại học Cần Thơ.
Wang, C.-Q., H. Wang and Y.-N. Liu, Separation of polyethylene terephthalate from municipal waste plastics by froth flotation for recycling industry. Waste Management.
Mohammad Abbasi, Mohammad Mehdi Salarirad, and Ismail Ghasemi, Selective Separation of PVC from PET/PVC Mixture Using Floatation by Tannic Acid Depressant,Iranian Polymer Journal 19 (7), 2010, 483-489.
Jensen JW, Holman JL, Stephenson JB (1974) Recycling and disposal of waste plastics. Ann Arbor Science, chap 7
Hợp phần sản xuất sạch hơn trong công nghiệp, Trung tâm sản xuất sạch hơn Việt Nam, Tài liệu hướng dẫn sản xuất sạch hơn.